Tuber

Back


UBT-3000(1) — LINE FOR PRODUCTION MULTIPLE-COATED GLUED PAPER PIPES (WORKPIECES FOR PAPER SACKS)     [MECHANICS+ELECTRONICS]    VIDEO

Оборудование для изготовления заготовок бумажных мешков УБТ-3000(1)

UBТ-3000(1)

Production speed: up to 70 m per minute (up to 120 workpieces per minute).
Sizes of produced workpiece:
     length: from 40 till 120 cm;
     width: from 20 till 63 сm.
Quantity of paper layers: 1-5.
Wattage: 3 kW.
Supply voltage: 380 W (50 Hz).
Measures:
     length: 17000 mm;
     width: 2500 mm;
     height: 2700 mm.
Weight: not more than 4000 kg.
The equipment warranty is 18 months.

Price — 4 262 000 roubles.

In this line a modern system of electronic control based on high precision and fast servo drives provides precise mutual point-to-point operation of machinery for stable activity is used. The time of change-over is kept to a minimum (adoption of the other type and size of a sack) and lasts for 5-15 minutes. All the main characteristics of the workpiece are brought in with the control touch screen. In addition to all standard operating regimes of work on workpieces length, perforation and cuts there is machine work by means of eyespot. For the purpose of online control system monitoring, software updating and efficient emergency messages reading there is a possibility to fit up the line with GSM module. This sleeve machine provides the possibility to fix the unit for producing workpieces with three bellows.

This line produces automatically workpieces of 1-5 layers with longitudinal and lateral gluing, application of perforation tracks and longitudinal cuts. If it is necessary you can fix the perforation assembly unit along the whole workpiece with the interlayer moving. You can produce workpieces with polyethylene layer. Polyethylene roll is fixed onto the winding-out unit by one of the rolls and polyethylene web moves between paper webs. As the result there is a workpiece with the interlayer polyethylene supplementary sheet.

FLOWCHART OF THE LINE UBТ -3000(1)

 

OUTPUT PRODUCT

Chart of the workpiece
for a valve sack

Chart of the workpiece
for a valve sack
  1. Splices.
  2. Longitudinal cuts.
  3. Sectorial perforation.
  4. Perforation with
          the interlayer moving.
Chart of the workpiece
for an open mouth sack

Chart of the workpiece
for an open mouth sack
  1. Splices.
  2. Longitudinal cuts.
Chart of the workpiece
with three bellows
Chart of the workpiece
with three bellows
  1. Splices.
  2. Three bellows.
There are optional versions of cuts
Saw-toothed
"Saw-toothed" cut
Direct straight cut
Direct straight cut

PHOTOGRAPHS OF THE LINE UBТ -3000(1)

  • УБТ-3000(1)
  • УБТ-3000(1)
  • УБТ-3000(1)
  • УБТ-3000(1)
  • УБТ-3000(1)
  • УБТ-3000(1)

VIDEO OF THE PIPE LINE UBТ -3000(1)